For a limited time only, all soft starters ship free! Discount automatically applied at checkout.
The Hyper Engineering Single Phase Soft Starters help by reducing inrush start-current by 60%. Automatic adjustments of the starting current to match compressor size and available supply voltage available. These soft starters help protect your A/C compressor from stalling, over-heating, contactor arcing damage, mechanical shock and motor reversal.
Want to know if you need a single-phase or three-phase soft starter? Read our blog to find out.
• For 1-phase scroll compressor applications
Voltage Ratings (ac) | 115, 220-240 Volts |
Operating Voltage Range (ac) | 95-127, 192-253 Volts |
Frequency | Models work on 50Hz or 60Hz |
Maximum Starting Current | 44 amps rms |
Maximum Step Starting Current | 39 amps rms |
Maximum Supply Impedance | 0.8 ohms |
Control Input | 240 volts AC |
Operating Temperature | -4°F to 150°F (-20°C to 65°C) |
Compressor Rated Load Amps (RLA) | 32 Amps Max |
IP Rating | 207 |
Dimensions | 5.30" x 2.94" x 1.96" (132mm x 72mm x 49mm) |
Material | ABS flameproof (UL-94V0) |
Software Cycle Delay | 180 sec., defrost cycle compatible (Primary Model) |
Software Fault Delay | 300 seconds |
Software Optimization | 1.75 to 7 hp compressors |
Duty Cycle | 15 starts/hr |
Shutdown on Low Voltage (115V) | Less than 95 volts |
Shutdown on Low Voltage (220-240V) | Less than 195 volts |
Power Loss Reset | 100ms detection |
Motor Monitoring | Monitors start winding potential |
Motor Reversal | Shutdown for 180 sec. |
EMC Compliance # | N2002 |
Validate your login